|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
M61524FP 2ch ELECTRONIC VOLUME WITH 4 INPUT SELECTOR REJ03F0035-0100Z Rev.1.0 Sep.19.2003 Features Function Input selector Input gain control Karaoke mode MIC MIX REC Output Surround Main Volume FEATURES 4input selector MUTE 0,+3,+6,+9dB Stereo, Lch mono, Rch mono, Vocal cut Mixing before the output of REC MIC amp:+6dB, With the MIC SWs LRch each one output With the ON/OFF SWs 0 -90dB, -/1dB step * A volume 0 to -24dB/1dB step * B volume 0 to -66dB, -/1dB step Each channel is independence control. (1) Bass -8 +14dB/2dB step,f0=100Hz (2) Mid:8dB/2dB step,f0=1KHz (3) Treble: 8dB/2dB step,f0=10KHz Add a Bypass Mode/Tone Mode changing SWs High Pass Filter Type 2 line serial data control . Tone control Bass boost Microcomputer Interface Application Mini Stereo, etc. Recommended Operating Condition Rated Supply voltage ......VCC = 9.0V (typ) Rev.1.0, Sep.19.2003, page 1 of 20 M61524FP System Configuration REC1 AVOLIN1 M 61524FP TOUT1 BVOLIN1 IN A1 IN B1 IN C1 IN D1 0,+3, +6+9dB A Volume1 Bypass B Volume1 Bass Boos t VOL OUT1 IN A2 IN B2 IN C2 IN D2 0,+3, +6+9dB Stereo Lch mono Rch mono Vocal cut A Volume2 Surround Tone co ntrol (Bass/ i d/Treble) M B Volume2 Bypass MIC SW +6dB Bass Boos t VOL OUT2 MCU Interface AVOLIN2 CLOCK DATA TOUT2 BVOLIN2 MIC REC2 Rev.1.0, Sep.19.2003, page 2 of 20 M61524FP Block Diagram and Pin Configuration (Top View) REFIN 1 REF AMP 42 SUR1 41 SUR2 4I nput selector 50k 50k PIN42 PIN41 REFOUT 2 4I nput selector 50k INA1 3 INB1 4 40 INA2 50k 50k INC1 5 50k 0 3dB/step SWA:Stereo /Lch mono +9dB /Rch mono 39 INB2 0 +9dB 3dB/step 50k 38 INC2 50k IND1 6 VCUT 7 REC1 8 AVOL (0 to24dB) 20k VOCAL CUT MIC AM P 37 IND2 MIC SW 50k 36 MICIN 35 REC2 34 AV OLIN2 40k MIC MIX PIN42 PIN41 20k AV OLIN1 9 TBI1 10 TBO1 11 TMI1 12 TONE (3band) Surround ON /OFF 2 2 SWB SWB 20k 20k 20k 20k 1 1 20k 20k 20k 20k AVOL (0 to 24dB) 40k 33 TBI2 Surround ON /OFF SURROUND 32 TBO2 31 TMI2 TT1 14 TOUT1 15 BVOLIN1 16 BB_A1 17 BB_B1 18 OUT1 19 VCC 20 DATA 21 40k TONE (3band) TMO1 13 30 TMO2 29 TT2 28 TOUT2 40k Bypas SW s (tone bl ck) o ON/OFF Bypas SW s (tone bl ck) o ON/OFF BVOL (0 to 66dB,-) BVOL (0 to66dB, -) 27 BVOLIN2 26 BB_A2 25 BB_B2 24 OUT2 BASS BOOST BASS B OOST SW BASS BOOST BASS B OOST SW MCU I/F 23 GND 22 CLOCK Rev.1.0, Sep.19.2003, page 3 of 20 M61524FP Pin Description Pin No. 1 2 3,4,5,6, 37,38,39,40 7 8,35 9,34 10,11,12,13,14, 29,30,31,32,33 15,28 16,27 17,18,25,26 19,24 20 21 22 23 36 41,42 Terminal name REFIN REFOUT INA~IND VCUT REC AVOLIN TBI,TBO,TMI,TMO,TT TOUT BVOLIN BB_A,BB_B OUT VCC DATA CLOCK GND MICIN SUR Function Input pin of reference Amp Output pin of reference Amp Input pin of input selector (Ch1 and Ch2) Frequency characteristic setting pin of vocal cut Output pin of REC (Ch1 and Ch2) Input pin of A volume (Ch1 and Ch2) Frequency characteristic setting pin of tone control (Bass/Mid/Treble) Output pin of tone (Ch1 and Ch2) Input pin of B volume (Ch1 and Ch2) Frequency characteristic setting pin of bass boost Output pin (Ch1 and Ch2) The power supply Input pin of Control Trigger (DATA) Input pin of Control Trigger (CLOCK) GND Input pin of MIC AMP Frequency characteristic setting pin of Surround Rev.1.0, Sep.19.2003, page 4 of 20 M61524FP Absolute Maximum Ratings (Ta=25C, unless otherwise noted) Symbol Power supply Pd K Topr Tstg Parameter VCC Power dissipation Thermal derating Operating temperature Storage temperature Ta 25C Ta > 25C Conditions Limits 10.5 850 8.6 -20 to +75 -40 to +125 Units V mW mW/C C C THERMAL DERATIN G (MA XIMUM RATING) 1.0 POWER DISSIPATION Pd [mW] 0.85W 0.75 0.5 0.42 0.25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE Ta [C ] Rev.1.0, Sep.19.2003, page 5 of 20 M61524FP Recommended Operating Condition (Ta=25C, unless otherwise noted) Limits Parameter Supply voltage Logic "H" level input voltage Logic "L" level input voltage Symbol VCC VIH VIL Conditions VCC=9V GND reference VCC=9V GND reference MIN 8 2.2 0 TYP 9 -- -- MAX 10 5.5 0.6 Units V V V Relationship between Data and Clock When DATA is "H", latch signal is crea at th falling edge of CLOCK. ted e CLOCK D0 D1 D2 D3 D13 D14 D15 DATA Data signal is read atthe rising edge of CLOCK. Make "H" at the timing which DATA of D0-D15 m latch. ake Rev.1.0, Sep.19.2003, page 6 of 20 M61524FP Clock and Data Timings tcr CLOCK 75% 25% tr tWHC 75% tf tWLC DATA 25% tr tSD Timing Definition of Digital Block Limits Symbol tcr tWHC tWLC tr tf tSD tHD Parameter CLOCK cycle time CLOCK pulse width ("H" level) CLOCK pulse width ("L" level) Rising time of clock and data Falling time of clock and data DATA setup time DATA hold time MIN 4 1.6 1.6 -- -- 0.8 0.8 tf tHD TYP -- -- -- -- -- -- -- MAX -- -- -- 0.4 0.4 -- -- Units S Rev.1.0, Sep.19.2003, page 7 of 20 M61524FP Data Control Specification Four types of input format can be selected by changing the D14/D15 slot setting status. (Initialize all data of the 4 formats when power supply(VCC) turn on.) (1) D0a D1a D2a D3a D4a D5a D6a D7a 4. Surro und D8a 5. MIC SW D9a 0 D10a 0 D11a 0 D12a 0 D13a 0 D14a 0 D15a 0 1. Input selector 2. Karaoke mode control 3. Input gain control (2) D0b D1b D2b D3b D4b D5b D6b D7b D8b D9b D10b D11b D12b 7. Bypass SW (tone block) D13b 8. Bass boost D14b 0 D15b 1 6. Tone control Bass 6. Tone control Mid 6. Tone control Treble (3) D0c D1c D2c D3c D4c D5c D6c D7c D8c D9c D10c D11c D12c 0 D13c 0 D14c 1 D15c 0 9. Lch A volume 10. Lch B Volume (4) D0d D1d D2d D3d D4d D5d D6d D7d D8d D9d D10d D11d D12d 0 D13d 0 D14d 1 D15d 1 9. Rch A volume 10. Rch B volume Rev.1.0, Sep.19.2003, page 8 of 20 M61524FP Setting Code It's initial setting when VCC turn on. 7. Bypass SW (tone block) D0a INA INB INC IND ALL OFF 0 0 0 0 1 D1a 0 0 1 1 1 D2a 0 1 0 1 1 ON OFF D12b 0 1 OFF ON 1. Input selector 8. Bass boost D13b 0 1 9. A volume ATT 2. Karaoke mode control D3a Stereo Lch mo no Rch mono Vocal cut 0 0 1 1 D4a 0 1 0 1 3. Input gain control D5a 0dB +3dB +6dB +9dB 0 0 1 1 D6a 0 1 0 1 4. Surround ON/OFF D7a OFF ON 0 1 5. MIC SW D8a OFF ON 0 1 6. Tone control (Bass/Mi d/Treble) Bass ATT Mi d Treble D0b D4b D8b 1 1 1 1 1 1 1 0 0 0 0 0 D1b D5b D9b 1 1 1 1 0 0 0 0 0 0 0 1 D2b D6b D3b D7b +14dB* +12dB* +10dB* + 8dB + 6dB + 4dB + 2dB 0dB - 2dB - 4dB - 6dB - 8dB D10b D11b 1 1 1 0 0 1 0 0 1 1 1 0 0 1 0 0 0 1 1 0 1 0 1 0 Lch AVOL Rch AVOL 0dB -1dB -2dB -3dB -4dB -5dB -6dB -7dB -8dB -9dB -10dB -11dB -12dB -13dB -14dB -15dB -16dB -17dB -18dB -19dB -20dB -21dB -22dB -23dB -24dB D0c D0d D1c D1d D2c D2d D3c D3d D4c D4d 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 *:+14dB +10dB can set up only a Bass. Note : Please don't input except specification data. Rev.1.0, Sep.19.2003, page 9 of 20 M61524FP 10. B volume ATT Lch BVOL D5c D6c D7c D8c D9c D10c D11c Rch BVOL D5d D6d D7d D8d D9d D10d D11d 0 0 0 0 0 0 0 0dB 0 0 0 0 0 0 1 -1dB 0 0 0 0 0 1 0 -2dB 0 0 0 0 0 1 1 -3dB 0 0 0 0 1 0 0 -4dB 0 0 0 0 1 0 1 -5dB 0 0 0 0 1 1 0 -6dB 0 0 0 0 1 1 1 -7dB 0 0 0 1 0 0 0 -8dB 0 0 0 1 0 0 1 -9dB 0 0 0 1 0 1 0 -10dB 0 0 0 1 0 1 1 -11dB 0 0 0 1 1 0 0 -12dB 0 0 0 1 1 0 1 -13dB 0 0 0 1 1 1 0 -14dB 0 0 0 1 1 1 1 -15dB 0 0 1 0 0 0 0 -16dB 0 0 1 0 0 0 1 -17dB 0 0 1 0 0 1 0 -18dB 0 0 1 0 0 1 1 -19dB 0 0 1 0 1 0 0 -20dB 0 0 1 0 1 0 1 -21dB 0 0 1 0 1 1 0 -22dB 0 0 1 0 1 1 1 -23dB 0 0 1 1 0 0 0 -24dB 0 0 1 1 0 0 1 -25dB 0 0 1 1 0 1 0 -26dB 0 0 1 1 0 1 1 -27dB 0 0 1 1 1 0 0 -28dB 0 0 1 1 1 0 1 -29dB 0 0 1 1 1 1 0 -30dB 0 0 1 1 1 1 1 -31dB 0 1 0 0 0 0 0 -32dB 0 1 0 0 0 0 1 -33dB 0 1 0 0 0 1 0 -34dB 0 1 0 0 0 1 1 -35dB 0 1 0 0 1 0 0 -36dB 0 1 0 0 1 0 1 -37dB 0 1 0 0 1 1 0 -38dB 0 1 0 0 1 1 1 -39dB 0 1 0 1 0 0 0 -40dB 0 1 0 1 0 0 1 -41dB 0 1 0 1 0 1 0 -42dB 0 1 0 1 0 1 1 -43dB 0 1 0 1 1 0 0 -44dB ATT LchVOL RchVOL -45dB -46dB -47dB -48dB -49dB -50dB -51dB -52dB -53dB -54dB -55dB -56dB -57dB -58dB -59dB -60dB -61dB -62dB -63dB -64dB -65dB -66dB - dB D5c D6c D7c D8c D9c D10c D11c D5d D6d D7d D8d D9d D10d D11d 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 1 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 Note : Please don't input except specification data. Rev.1.0, Sep.19.2003, page 10 of 20 M61524FP Electrical Characteristics Unless otherwise noted, Ta=25C, VCC=9V, f=1kHz, Input gain control=0dB, Karaoke mode control=Stereo, MIC SW=OFF, Surround=OFF, Bypass SW (tone block)=ON, Tone=Flat, Bass boost=OFF, A/B volume=0dB Parameter Circuit current Input resistance Maximum input voltage Maximum output voltage Input/Output characteristics (OVER ALL) Symbol IACC Rin VIM VOM Condition No signal, Pin20 current 3,4,5,6Pin/37,38,39,40Pin/36Pin (3,40)Pin input,(19,24)Pin output RL=10k, THD=1% (3,40)Pin input,(19,24)Pin output RL=10k, THD=5%,Bass boost ON, f=50Hz (3-19)Pin-(40-24)Pin Vi=1Vrms,FLAT Vo=1Vrms,(19,24)Pin output JIS-A, VOL=- No signal, JIS-A, Rg=0 , 19,24Pin output A/B volume=-dB Surround OFF,Tone Bypass ON A/B volume=0dB Surround OFF, Tone Bypass ON A/B volume=0dB Surround OFF, Tone Bypass OFF (3,40)Pin input,(19,24)Pin output BW:400 30kHz,Vo=0.5Vrms,RL=10k (3-24)Pin-(40-19)Pin Vi=0.5Vrms,JIS-A,RL=10k ,Rg=0 (9,34)Pin input Bass setting=+14dB (15,28)Pin output Vi=0.2Vrms, f=100Hz (9,34)Pin input (15,28)Pin output Vi=0.2Vrms, f=1kHz (9,34)Pin input (15,28)Pin output Vi=0.2Vrms, f=10kHz Bass setting=-8dB Mid setting=+8dB Mid setting=-8dB Limits MIN -- 25k 1.6 1.8 TYP 20 50k 2.0 2.2 MAX 40 75k -- -- Units mA Vrms Vrms Pass gain Maximum attenuation Output noise voltage Gv ATT VnoA -2.0 -- -- 0.0 -90 4 2.0 -85 8 dB dB Vrms VnoB -- 7 14 Vrms VnoC -- 10 20 Vrms Total harmonic distortion Cross talk of mutual channels Bass voltage gain Tone Ccontrol characteristics THDA CT GBbass GCbass -- -- 12 -10 6 -10 0.02 -70 14 -8 8 -8 0.1 -55 16 -6 10 -6 % dB dB dB dB dB Mid voltage gain GBmid GCmid Treble voltage gain GBtre GCtre Treble setting=+8dB Treble setting= -8dB 6 -10 -2 8 -8 0 10 -6 2 dB dB dB Balance of mutual channels BALT Boost condition +8,-8dB (9,34)Pin input,(15,28)Pin output Rev.1.0, Sep.19.2003, page 11 of 20 REC1 (Note 3) (Note 2) External Surround IC 8 9 7 10 11 12 13 15 16 14 7 8 1 SWC M61524FP OUT1 REC1 17 18 19 INA1 9 3 External Resonance cicuit r INB1 Internal Block Diagram 4 2 0,+3,+6,+9dB INC1 Rev.1.0, Sep.19.2003, page 12 of 20 5 IND1 6 MI C MI X Bass/M id/Treble 42 BASS BOOST SWF:/BYPASS SW (TONE BLOCK) ON/OFF CLOCK 22 4INPUT SELECTOR SWA:STEREO /Lch mono /Rch mono AVO L (0 to-24dB) SURROUND SWE: SURROUND ON/OFF BVOL (0 to -66dB, -) SWF:/BYPASS SW (TONE BLOCK) ON/OFF MCU I/F 21 VOCAL CUT 41 MI C MI X 1 DATA BASS BOOST 4INPUT SELECTOR INA2 2 SWB 40 2 INB2 1 SWC Bass/M id/Treble 39 INC2 35 34 38 0,+3,+6,+9dB IND2 37 SWD:MIC ON/OFF 33 32 31 30 29 28 27 26 25 24 36 REC2 MIC AMP External Surround IC REC2 35 34 MIC IN (Note 3) OUT2 REF 20 23 1 2 (Note3% Setting of SWB,SWC) STEREO L,Rch MONO!3 ,Vocal cut!5 4 (Note5% When resonancecircuit is connec t pin 7,It can getthe char cter ted o a which m akes only a vocal attenu ation. (Note6% Use pin8,9/pin34/35 asan interface terminal when yo use e u xternal surround. M61524FP Tone Control (1) Bass/Mid IN R3 R2 Q~ = 1 C1+C2 Boost OUT fo = 27 1 R1(R2+R3) C1C2 C1C2R2 R1 (Hz) (In the case of R3=0) C1 R1 C2 Gv = 20log R2+R3 (In the case of C1=C2) +2 R1 (dB) R3 +2 R1 Cut IN OUT R2 R3 fo = 27 Q~ = 1 R1(R2+R3) C1C2 C1C2R2 R1 (Hz) 1 C1+C2 (In the case of R3=0) C1 R1 C2 R3 +2 R1 Gv = 20log R2+R3 +2 R1 (In the case of C1=C2) (dB) (2) Treble IN R1 R2 Gv = 20log Boost OUT R1+R2 R1 (dB) C Cut IN OUT R2 R1 Gv = 20log R1 R1+R2 (dB) C Rev.1.0, Sep.19.2003, page 13 of 20 M61524FP Frequency response of tone control * This frequency response is a simulation result. (1) Bass (R1=2.2k, C1=C2=0.22F) * Internal resistance value(Reference value) R2 +14dB +12dB +10dB 8dB 6dB 4dB 2dB 22.6k 21.1k 19.3k 17.0k 14.1k 10.4k 5.8k R3 1.2k 2.7k 4.5k 6.8k 9.7k 13.4k 18.0k (Units: ) (2) Mid (R1=2.2k, C1=C2=0.022F) * Internal resistance value(Reference value) R2 8dB 6dB 4dB 2dB 17.0k 14.1k 10.4k 5.8k R3 6.8k 9.7k 13.4k 18.0k (Units: ) Rev.1.0, Sep.19.2003, page 14 of 20 M61524FP (3) Treble (C=4700pF) * Internal resistance value(Reference value) R1 8dB 6dB 4dB 2dB 13.1k 16.7k 21.2k 26.8k R2 20.8k 17.2k 12.7k 7.1k ( Units: ) Rev.1.0, Sep.19.2003, page 15 of 20 M61524FP Bass Boost IN OUT GO Q=2, (G=6dB) 0dB R1 F0 VI N C1 C2 +K R2 K=1 R1R2C1C2 R1(C1+C2)+(1-K)R2C2 VO H.P.F characteristic Reference Q 1 2 4 5 10 GO 0~1dB 6dB 10dB 13dB 20dB fo = 2 1 R1R2C1C2 Hz Q= Frequency response of Bass boost R1=1.8k, R2=27k, C1=C2=0.47F(f050Hz, Q2) * This frequency response is a simulation result. Rev.1.0, Sep.19.2003, page 16 of 20 M61524FP Surround Surround Block AV OL1 ( Ch1 IN) External parts 42 1+ 1k SUR2 34 41 5k 5k 5k 5k 9 ( Ch1 OUT) SUR1 5k To the tone bl ck o 5k ( Ch2 IN) AV OL2 5k 5k ( Ch2 OUT) To the tone bl ck o Frequency response of Surround (Ch1:input, Ch2:GND) * This frequency response is a simulation result. Gain Ch1OUT Ch2OUT Phase Ch1OUT Ch2OUT Rev.1.0, Sep.19.2003, page 17 of 20 M61524FP Vocal Cut It is the function which attenuate a vocal from the music source. The vocal is usually located in the center. And it is same amplitude and phase in L and R channel. So, a vocal inside music is attenuated by doing L-R. But, a low frequency signal be attenuated in this case. Therefore, a low frequency signal be made to pass with LPF, and it makes up for the shortage of the low frequency signal . 0.47 External parts for vocal cut. (LPF Type) 7 MIC MIX 20k 20k 10u Lch IN 50k REF 27k 27k 10u REF 50k 20k 20k MIC IN +6dB Rch IN 50k REF 27k 20k 27k 20k 20k 20k (Note), The output of the vocal cut is mono. MIC MIX When resonance circuit is connected to pin 7, It can get the character which makes only a vocal attenuation. Example :External resonance circui t 0.15 0.039 22k 100 Frequency response of vocal cut * This frequency response is a simulation result. Resonance circuit TYPE 4.7k 7 LPF TYPE Rev.1.0, Sep.19.2003, page 18 of 20 M61524FP Application Example 100 1 100 REF AMP 42 41 4I nput selector 4I nput selector PIN42 PIN41 50k 50k 50k 1 1k 10 2 10 INA1 10 3 4 40 50k INA2 10 INB1 10 50k INC1 10 5 50k 0 3dB/step SWA:Stereo /Lch mono +9dB /Rch mono 39 0 +9dB 3dB/step 50k INB2 10 38 50k INC2 10 10 IND1 When outside Sur ound is used. r 6 0.47 Vocal cut MIC AM P 37 MIC SW 50k 7 REC1 8 External Surround IC 36 20k 20k -24dB ) AVOL (0 -24dB ) 20k 9 0.22 2.2k 0.22 40k MIC MIX PIN42 PIN41 20k 9 10 11 12 Tone (3band) Surround ON /OFF 20k 20k AVOL (0 34 40k 33 Surround ON /OFF 34 0.22 0.22 2.2k Surround 32 31 0.022 2.2k 4700p 0.022 0.022 2.2k 0.022 4700p 14 10 Tone (3band) 13 30 29 28 40k 15 16 0.47 40k Bypas SW s (tone bl ck) o ON/OFF Bypas SW s (tone bl ck) o ON/OFF 10 BVOL (0 to 66dB, -) BVOL (0 to 66dB, -) 27 26 25 27k 0.47 17 18 27k BASS BOOST BASS BOOST SW BASS BOOST BASS BOOST SW 0.47 0.47 1.8k 1.8k OUT1 Connect to pin2 19 20 MCU I/F 24 23 22 OUT2 Connect to pin2 DATA 21 CLOCK Rev.1.0, Sep.19.2003, page 19 of 20 External Surround IC REC 1 10 8 2 2 SWB SWB 20k 20k 20k 20k 1 1 REC 35 2 10 REC2 35 When outside Sur ound is used. r IND2 MIC M61524FP 42P2R-E MMP JEDEC Code -- e b2 22 Plastic 42pin 450mil SSOP Weight(g) -- Lead Material Cu Alloy+42 Alloy EIAJ Package Code SSOP42-P-450-0.80 I2 Package Dimensions 42 HE E L1 L Rev.1.0, Sep.19.2003, page 20 of 20 e1 Recommended Mount Pad F Symbol 21 1 G D A A2 y b A1 e A A1 A2 b c D E e HE L L1 z Z1 y c z Detail G Detail F Z1 b2 e1 I2 Dimension in Millimeters Min Nom Max 2.4 -- -- -- 0.05 -- -- 2.0 -- 0.4 0.3 0.25 0.2 0.15 0.13 17.7 17.5 17.3 8.6 8.4 8.2 -- 0.8 -- 12.23 11.93 11.63 0.7 0.5 0.3 -- 1.765 -- -- 0.75 -- -- 0.9 -- 0.15 -- -- 0 -- 10 -- 0.5 -- -- 11.43 -- -- 1.27 -- Sales Strategic Planning Div. Keep safety first in your circuit designs! Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 http://www.renesas.com (c) 2003. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon 1.0 |
Price & Availability of REJ03F0035M61524FP |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |